Komatsu — 12.1.4 OPERATIONS AND CHECKS BEFORE STARTING ENGINE

12. OPERATION 12.1.4 OPERATIONS AND CHECKS BEFORE STARTING ENGINE A WARNING If the blade control levers are touched by accident, the work equipment may move suddenly. When leaving the operator’s compartment, always set the safety lever se- curely to the LOCK position. I Machines equipped with canopy 1. Check that the brake pedal is locked with parking lever 0. If they are not at these positions the engine will not start. 2. Check that gear shift lever 0 is at the 1st speed position. 3. Check that steering and directional lever 0 is the N (neu- tral) position. 2-56