Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING up to the FULL mark. 3 - 71 CHECK BEFORE STARTING Always perform the procedures in this section before starting the engine eac Do not open th e radiator cap unle ss necessary. W hen checking th e coolant, always wait for the engine to co ol down and check the sub-tank. Immediately a fter the engine is st opped, the cool ant is at a high t emperatur e and th e radiator is under high internal pressure. If the cap is re moved to check th e coolant level i n this condition , there is a hazard of burns. Wait for the temperature to go down, then tu rn the cap slowly to release the pre ssure and remo ve it c arefully. 1.

Check that the cooling wat LOW marks. er in sub tank (1) is between the FULL and 2. If the level i s LOW, remove cap (2) and add the engine coolant 3. If there is no coolant in of the same de the subtank, nsity as the S lant through w add Supercoolan (AF-NAC) upercoolant i n the t the . radiator. A dd the Supercoo ater filler (3) a top of the r adiator, then add Supercoolant to the subtank 4. Check that there is no oil in the engine coolant or any other g coolant, tighten the cap securely. olant is added than normal, then check for water other problem. 5. After addin g coolant, tighten the cap secur 6. If more co leakage.