Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE 4 - 7 FUEL To prevent the moisture in the air fro m condensing and forming water inside the fuel tank, always fill the fuel tank after completing the day's work. ent, and if fuel containing water or dirt is used, it cannot work properly. ities get in when storing or adding fuel. mperatures given in the Operation and Maintenance Manual. The fuel pump is a precision instrum ent, and if fuel containing water or dirt is used, it cannot wo rk properly.

Be extremely careful not to let impur Always use fuel that matches the te mperatures given in the Operation and Mainte nance Manua If the fuel is used in temperatures of lower than -15°C), the properti If the fuel is used in temperatures this may result in a drop in output If the fuel is used in temperatures lower than the specified temperature for use (particularly a t temperatures es of the fuel will make it congeal. If the fuel is used in temperatures higher than the specified temperature for use, t he viscosity w ill go down, and or other problems. Before starting the engine, or when 1 0 minutes have passed after adding fuel, drain the sediment and water from the fuel tank.

If the engine runs out of fuel, or if the filters have been replaced, it is necessary to bleed the air f rom the circuit. If there is any foreign material in the fuel tank, wash the tank and fuel system. NOTICE Use only diesel fuel. Use The engine mounted on this machine emplo ys electronic control and a high-pressure fuel inje ction device to obtain good fuel consumption and good exhaust gas charact eristics. For this reason, it requires high precision fo r the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there will be a big drop in durability . COOLANT AND WATER FOR DILU TION on of preventing corrosion as well as preventing freezing.

not an issue, the use of antifreeze coolant is essential. Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has The coolant has the important functi on of preventing corrosion as well as preventin Even in the areas where freezing is not an issue, the use of antifreeze coolant is e Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze an d cooling propertiesand can be used continuou sly for 2 years or 4000 hours. As a basic rule, we do not recom mend the use of any coolant other than Komatsu genuine supercoolant nt, it may cause serious problems, such as corrosion of the engine and m.

rve the precautions given in the Operation and Maintenance Manual. with distilled water, so it is not flammable. atsu genuin e supercoolant (AF-NAC). If you use another coola and aluminum parts of the cooling syste When using antifreeze, always obse rve the precautions given in the Operation and Maintenanc The Supercoolant is already diluted with distilled water, so it is not flammable. With the Supercoolant (AF-NAC), the density used for the coolant differs according to the ambie nt temperature. For details of the coolant density, se e "CLEAN INSIDE OF COOLING SYSTEM (P AGE 4-28)".

Even in areas where it is not conside red necessary to prevent freezing, always use Supercoolant (AF-NAC) with a density of over 30% in order to pre vent corrosion of the cooling system. with distilled water that does not contain any ions or water-hardening oolant with ordinary water. engine to cool before adding coolant. Supercoolant (AF-NAC) is diluted substances. Never dilute the Superc If the engine overheats, wait for the If the coolant level is low, it will cause overheating, and will also cause problems with corrosion du e to air entering the coolant.