Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK WEAR OF REAR BRAKE DISC WARNING for REMARK 4 - 70 Carry out this c heck when the br ake oil temper ature is below 6 0°C (140° F). If the disc wear approaches the w ear limit, chec k the condition frequentl y, regardless of the maint enance interval. In ad dition, check the retar der capacity caref Always carry ou t this operation w ith the engine 1. Stop the ma chine on level g round, set th e parking brak e switch to other brakes are not applied before starti ng inspection 2. Remove cap ition, then check th at the 3. Push in until rod (2) of the g auge contac ts the piston. Do depress the brake pedal wh en doing this 4.

If slit (3) of ro d (2) goes in be yond guide e nd face (4), it that the disc has reached th e wear limit. If this happe ns, please con inspection a nd maintenance 5. Install cap n ut (1) removed i Tightening to Tightening to rque: 128 to 18 (13 to 19 kgm, 94 to 1 On a new ma ion of the gu ide is adjuste d so that sli t (5) comes to guid e end face (4), so do not loosen locknu t (6) except wh en replacing When the en gine is started a nd the rod is pushed in, th e ro d is pushed back by the br ake cooling oil pressure, so carry out t his operation wi th the engine