Operating & maintenance manual 6 Before starting the compaction roller 6.1 Prior to the initial start 6.2 Checking the compaction roller: Visual inspection Clean the exterior mirrors Check fill levels Prior to starting the compaction roller, perform a visual inspection to get a picture of the current condition of the compaction roller. Check: the accumulation of dirt and clean the compaction roller by means of a high pressure washer, if necessary. the drum and the condition of the contact scrapers with flexible vulcollan bar. the condition and the air pressure of the tires (adjust the tire pressure, if necessary:
1.6 bars for standard tires with water filling; for special tires, consult the tire manufacturer. the following fill levels: Fuel (Diesel) Hydraulic oil Engine oil Water level for the windscreen washer system whether the windows of the cab are dirty - clean the exterior and interior window panes, if required whether the exterior mirrors are dirty - clean them, if required. Clean windows Check pressure Fig. 12 Visual inspection 25 SAFETY Obligation to inform yourself! Inform yourself of all issues related to operating the compaction roller. Read the safety instructions before starting the compaction roller.
In addition to this, be sure to observe the national and local laws and directives concerning the operation of earth-moving construction machines. In case of doubt, contact your local Hyundai dealer. INSTRUCTIONS Tires Pressure Equipment Standard tires 1.2 to 1.6 bar (17.4 to 23.2 psi) with water filling Special tires Please contact the tire manufacturer for information on the required pressure!