Operating & maintenance manual Longitudinal adjustment Make the necessary adjustments by means of the corresponding locking lever ( 2 ). Lift the locking lever and move the driver‘s seat into the desired position until the locking lever clicks into place. 2 Fig. 22 Longitudinal adjustment Adjust the backrest by means of the corresponding lever ( 3 ). Lift the locking lever and move the backrest into the desired position. Check whether the locking lever ( 3 ) has clicked back into place after you have made the adjustment. 3 Fig. 23 Backrest inclination The armrest on the left is foldable and its height can be adjusted.
In order to adjust the height of the left armrest, remove the cap ( 4 ) covering the adjusting nut. Loosen the adjusting nut ( 5 ). Move the armrest to the desired height and tighten the adjusting nut again. Attach the cap. 4 5 Fig. 24 Left armrest 31 WARNING After making the required adjustments, ensure that the locking lever has clicked into place. If this is the case, the position of the driver‘s seat is fixed, i.e. it must not be possible to move it into another position any more! WARNING After making the required adjustments, ensure that the locking lever has clicked into place. As long as it is still possible to move the seat or the backrest, you may not start the compaction roller!