hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 36 Symbol Function Description Display Parking Brake (red) Activation indicates the application of the parking brake. The Diesel engine can only be started with the parking brake applied. If the parking brake is applied during operation, the compaction roller stops. Display Forward motion (green) Indicates that the compaction roller is moving forward Indicates that the compaction roller is moving backward Display Reverse motion (green) Display ECO Speed Option (yellow) Lights up on activation of the ECO speed mode, see chapter on the compaction of soil with ECO speed.

LED lights up while the Diesel engine is being Display Preheating (yellow) preheated (ignition lock position I) and goes out as soon as the starting temperature is reached. Charge control (red) Lights up on activating the ignition. Goes out after the Diesel engine and the generator have started. Red light indicates insufficient hydraulic oil pressure in the brake system. Brake pressure (red) Diesel engine oil temperature (red) If this lamp lights up, immediately stop the compaction roller and let the Diesel engine idle to cause the engine oil to cool! See Deutz operating manual.

If this symbol lights up, stop the diesel engine and Diesel engine oil pressure (red) do not resume operation before the problem has been eliminated. Indicates an insufficient level of coolant in the cooling circuit, see chapters on maintenance. Coolant fill level Diesel engine (red) Accumulation of dirt in the air filter If this lamp lights up, clean / replace the filter, see chapters on maintenance. Indicates that “high amplitude“ has been selected Display high amplitude (yellow) by means of the switch “soil compaction“ on the panel next to the joystick .

Indicates that “low amplitude“ has been selected Display low amplitude (yellow) by means of the switch “soil compaction“ on the panel next to the joystick . Override function drum (green) Indicates that the switch “Override function hydraulic engine drum“ on the panel next to the joystick is activated. The engine is manually set to its highest swallowing capacity (maximum rotational speed). Indicates that the switch for the HD system of the rear axle has been turned on. Indicates that the switch for the HD system of the Optional feature: Rear axle drive rear axle has been turned on. (green)