hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual Panel of switches in the right armrest: The switches in the panel of switches ( 3 ) in the right armrest control the functions for driving and vibration. 3 Selector switch Vibration type soilcompaction ( 3.1 ): Middle position ( 0 ) = Vibration off Front pressed down ( H ) = Deep compaction / high amplitude Rear pressed down ( L ) = Surface compaction / low amplitude 3.2 3.1 Override Hydraulic motor Drum on/off ( 3.2 ) (see section on HA control in this manual) w/o illustration, optional feature: Switch HD system rear axle ( 3.3 ) Serves to activate / deactivate the 2nd stage of the rear axle. Front of switch pressed down:

1st stage, low tractive power Rear of switch pressed down: 2nd stage, high tractive power 3.3 3.1 0 L H Fig.37 Functions of the switches 40 NOTICE By setting the type of vibration, the vibration itself has not been activated. SAFETY Obligation to inform yourself! These settings are required in order to drive on heavy soil and on slopes. Please refer to the corresponding sections in this operating manual. INSTRUCTIONS