Operating & maintenance manual 9.3.6 Driving in the rain Front & rear wipers: • Activate the front wiper by means of the switch ( 4 ) on the panel at the cab roof ( 1 ). • In case the front screen is dirty, press the switch for the windscreen washer system ( 5 ) and clean the front screen. • Activate the rear wiper by means of the corresponding switch ( 6 ) on the panel at the cab roof ( 1 ). • If the rear window is icy or steamed up, actuate the switch for the rear window heating ( 7 ). 1 2 3 4 5 6 7 Fig. 47 Switches wipers 9.3.7 Driving in the dark or with restricted visibility Activation of the work lights:
• The switch for the front and rear work lights ( 2 ) is installed on the panel at the cab roof. • At dusk, immediately activate the front and rear work lights by means of the corresponding switch ( 2 ). 2 Fig. 48 Switch work lights Fogged up or icy windows: • If the windows are fogged up, set the fan to the highest stage by means of the corresponding rotary switch ( 8 ). • Set the rotary switch for the heating ( 9 ) to the red area. • Adjust the air nozzles so the warm air flow points to the cab windows. • In case the rear window is fogged up, actuate the switch for the rear window heating ( 7 ) on the panel at the cab roof. 8 9 Fig. 49 Fogged up windows 46 WARNING Risk of accidents!
If the windows are fogged up or icy or if fog or precipitation cause restricted visibility,immediately stop the vehicle or reduce its speed to render an instant stop possible. Do not resume operation unless a sufficient allround view has been attained. WARNING Risk of accidents! Make sure the work lights are always activated while operating the compaction roller. WARNING Danger due to limited visibility! If the visibility range, despite of the activation of the working lights, is shorter than the braking distance of the compaction roller, immediately stop the operation of the compaction roller.