Operating & maintenance manual 10.3.5 Driving downhill For downhill reverse motion, the rear of the compaction roller needs to point downhill, in the direction of motion. Check whether the switch for selecting the type of vibration is set to the middle position 0 . Hold on to the steering wheel. Move the joystick ( 1 ) backward for downhill reverse motion. 1 Fig. 60 Driving downhill 10.3.6 Stopping the operation on slopes Stop the compaction roller by actuating the joystick ( 1 ) or, in the event of an emergency stop, by means of the emergency stop push-button ( 5 ). Move the joystick back into the neutral ( N ) position. Press the switch ( 4 ) to apply the parking brake.
The symbol indicating the activation of the parking brake lights up on the dashboard. 1 5 4 Fig. 61 Stopping the operation on slopes 53 DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button (5). DANGER Risk of death! To prevent the compaction roller from rolling, be sure to secure it by placing wheel chocks under the rear wheels after every operation. If the compaction roller is parked on a slope and needs to be towed, make sure that the rear wheels and the drum are adequately secured!