Operating & maintenance manual 19 Maintenance certificates B & C: Maintenance work to be performed by service staff □ Ascertain that the required work for maintenance certificate A has been carried out.
□ Be sure to perform all maintenance work related to the Diesel engine according to the instructions in the Deutz service manual At intervals of 100 operating hours / on a weekly basis (maintenance certificate B) Check the water-fuel separator After the initial 50 operating hours / at intervals of 500 operating hours (maintenance certificate C) Replace the preliminary fuel filter Check the coolant level* Change the engine oil Replace the oil filter Check the oil level at the drum drive* Check the oil level in the rear axle* Check the oil level at the vibration drive* Replace the oil filter cartridge Change the oil in the wheel drives Check the oil level in the wheel drives (rear axle)* Change the oil in the axle housing Maintenance work related to the battery Check the printed circuit board, the fuses and relays Maintenance work related to the ventilation system, the drum & vibration drives As soon as the service indicator lights up on the display or after carrying out repair work:
Check the cooling system Replace the combustion air filter At intervals of 2000 operating hours: Hydraulic oil change *add oil/coolant, if required 87