Seat Belt 15 1 Seat Belt Unfastened Warning Light Correctly Wear a Seat Belt Wear a Front Seat Belt Slowly and smoothly moving the expendable seat belt will allow you to move freely. Be sure to pull out the seat belt after it has fully retracted. If the seat belt cannot be pulled out of the tensioner, you may first have to pull the seat belt with force and then release it. After this, you will be able to smoothly pull the seat belt out of the tensioner. Warning If the seat belt cannot be pulled out, you should pay attention to driving safety and go to an authorized BAIC dealership to have the seat belt checked.
If the ignition switch has been turned on but the driver does not fasten the seat belt, the seat belt indicator light on the display screen of the instrument information center will be lit. If the driver does not fasten the seat belt and the vehicle speed exceeds 25km/h, or when the vehicle moves forward of a distance of 500m or for more than 60s at a speed of under 25km/hither warning light will immediately be lit, accompanying an audible alarm. Front passenger seat is also provided with seat belt unlock alarm to warn the passengers of correct use of the seat belt.
Correctly adjust the front seat and its headrest, pull out the seat belt from the retractor, insert the latch of the seat belt into the buckle, and tighten the seat belt. When the latch is locked inside the buckle, a clicking sound will be heard. The seat belt length will automatically be adjusted according to your body size and seat position. In the event of emergency braking or collision, the tensioner will tighten the seat belt. If you lean forwards too fast, the tensioner will also tighten.