Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION DETAILED CONTROLS AND GAUGES REMARK Travel Levers WARNING This lever (2) is used to change the direction of travel between forward and reverse. ( ) shows the pedal operation. (a) FORWARD: The lever is pushed forward (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops 3 - 69 This lock lever is of hydrau lic lock type. Accordingly, when i t is in the lock position (L), the co ntrol levers or contro pedals move but the mach Do not rest your foot on the pedal. If you carry out operations wit h your foot on the pedal, the mach by mistake to the pedal, an extremely careful when operations, and do not p necessary.

ine may suddenly start if pressure is a pplied d this may lead to serious personal inju ry. Be using the pedal for travel and steering ut your foot on the pedal when it is not eering When the track frame is fac ing the rear, the direction of operation of the steering lever is the opp machine (forward/reverse, When operating the travel l the front or the rear. (Wh frame is facing the front.) osite to the direction of movement of the left/right turn).

ever, always check if the track frame is facing en the sprocket (A) is at the rear, the track REMARK If the lever is shifted to the FORWARD or REVERSE positio n from the Neutral position, the al arm sounds to warn that the mach ine is starting to move.