. OPERATION MACHINE OPERATIONS AND CONTROLS Checks Before Starting Check Coolant Level, Add Coolant WARNING NOTICE 3 - 112 Always check the items in this sec tion before start ing the en gine each Do not open the r adiator cap unless n ecessary. When checking t he coolant, always wait for the engine to cool down and check th e sub-tank. Immediately after the engine is stop ped, the coolant i s at a high temperatur e and the radiator is unde r high internal pressure. If t he c ap is remo ved to check the c oolant level in th is condition , there is a hazard of burns. Wait fo r the temperature to go down, then turn t he cap slowly to re lease the pressur e and remo ve it c .
O pe oolant level i s between the FU LL and LOW m arks on ra diato ub-tank (1) ( shown in the diag ram on the righ f th e water le vel is low, add w ub-tank (1) t o the FULL level. . A fter adding c oolant, tighten th e cap securely. If the sub-tank beco nt leakage . Afte checking, repair any abnormality imme diately. If no abn ormality is found check the level of th e water in the radiat or. If it is low, add COOLANT of the same density in ra diator according t o the COOLANT density ta ble in "CLEAN I NSIDE OF COOLING SYSTEM (PAGE 4-22)", th en add COOLANT to the sub-tank.