. OPERATION MACHINE OPERATIONS AND CONTROLS Wind-in Type Seat Belt WARNING replace the seat belt. REMARK 3 - 126 Before fitting the seat belt, check that there is no pro blem in the b elt mount bracket or m ounting belt. If it is wor n or damaged, Even if there are no signs of damage, replace belts i n accordance with the following sc he date of seat bel t manufacture, or ev ery 3 years a fter th e start of actual usage, whichever date Always wear t he seat belt during Fit the seat be lt so that it is not t wiste The date of se at belt manufacture at tached to the seat belt is the start of the 5-ye ar period.
It is not th e start of the 3-year period o Fastening and Removing Seat Belt This seat belt has a wind-in device, so it is not ne cessary to adjus Fastening seat b elt Hold grip (2) an d pull the belt out from wind-in devi ce (1), chec k that the belt is no securely. When doing th locked. t twisted, then insert tongue (3) into buckle (4) is, pull the belt lightly to check that it is properly inser Removing belt Press button (5 ) in buckle (4), a nd re move tongu e (3) from b uckle (4). The belt is aut omatically wound in, s o hold grip ( 2) and retur n the belt slowly to w ind-in device (1) .