Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Engine Warm Up is white 3 - 135 NOTICE Do not acc been comp elerate the engine suddenly until the warm-up operation has leted. Do not run than 20 mi and will al the engine at low idling or nutes. This will have an ad so have an adverse effect high idling under no load verse effect on the envir on the internal structur for more onment, e of the engine. If it is necessary to run the engine at idling for more than 20 minutes, a pply a load from time to tim e or run at a mid-range speed. After the eng ine starts, do not start o perating the machine i mmediately. First, carr y out the following op erations and checks. 1. This ma below 5 automat speed.

If the en engine s chine is equipped with an automatic engine warm-up system, so if the engine water temperature is 1. 1. warm-up below 5 5 °C after the engine is started, the engine wa rm-up operation starts automatically. Whe n the engine automat ic warm-up operation sta rts, the engine speed i s maintained at a spee d higher than the nor mal low idling speed. gine water temperature goes above 55 °C , the automatic warm-up operation is cancelled and the peed drops to the normal low idling speed. If the en engine s peed drops to the norm 2. After 10 minutes warm-up operation, Check that engine temperature monitor (1) displays the correct ture.

lays low temperature, use the procedure in Step 3 to engine coolant correct tempera If it disp carry out additional warm up of displays the correct temperature (A) Display when temperature is the engine until the monitor . correct: Monitor background (C) is blue low: Monitor backgro 3. Turn fue l control dial (2) to a poi nt midway between lo w idling (MIN) an d full speed (MAX), run the engine under no l oad at a mid-ran ge speed until engine co olant temperature mo nitor (1) displays the correct temperature . (A) Display when temperature is cor rect: Monitor background (C) is blue : Monitor background (C) is white (B) Display when temperature is low