Komatsu — BUCKET REPLACEMENT AND INVERSION

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS REMARK (3) down to the regular groove. 3 - 167 Install the O-ring (3) int o retaining hole (1) of th e ar m (5) and bucket (4). When installing the bucket ( 4), th e O-rings (3) are e asily damaged, so f it the O-rings (3) on the boss of the arm (5) end as shown in the diagram on the right. W hen knocking in the pins, move the O-ring 5. Instal l the stopper bolts and nuts for e ach pin, then grease the pin.