. OPERATION TROUBLES AND ACTIONS chart below. Machine Monitoring System (*): For details of handling the emergency pump drive switch, see "Emergency Pump Drive Switch (PAGE 3-67)". Point of Contact to Telephone when Error Occurs If an error screen is displayed on the monitor, the telephone number for the point of contact is displayed at the bottom of the error screen. REMARK If no point of contact telephone number has been registered, no telephone number is displayed. It is necessary to register the telephone number, please ask your Komatsu distributor to carry out the registration.
3 - 202 Electronic Control System When the user code is shown on the display portion of the machine monitor, t ake the respective measures shown in th e self-diagnosis Monitor display Failure mode Action E02 Pump control system error When emergency pump drive switch is at the up (emergency) position, normal operations become possible, but have inspection carried out immediately. (*) E03 Swing brake system error Have inspection carried out immediately. E10 Engine controller power source error Engine controller drive system circuit error (engine stopped) Have inspection carried out immediately.
E11 Engine controller system error Output reduced to protect engine Operate machine to a safe posture and have inspection carried out immediately. E14 Abnormality in throttle system Operate machine to a safe posture and have inspection carried out immediately. E15 Engine sensor (coolant temperature, fuel pressure, oil pressure) system error Operations are possible, but have inspection carried out immediately. E0E Network error Operate machine to a safe posture and have inspection carried out immediately.