Komatsu — ELECTRIC SYSTEM MAINTENANCE

. MAINTENANCE OUTLINE OF SERVICE 4 - 7 OIL SAMPLING Sampling interval 250 hours: Engine 500 hours: Other components Precautions when sampling 25 50 Make sure that the oil is well mixed Perform sampling at regular fixed in Do not perform sampling on rainy or windy days when water or dust can get into th For fu rther details of KOWA, please conta STORING OIL AND FUEL , or other impurities from getting in. Keep indoors to prevent any water, dirt When keeping drum cans for a long per iod, put the drum on its side so that the filler port of the drum s is at the side to prevent moisture from being sucked in.

If d rums have to be stored outside, cov er them with a waterproof sheet or take other m easures to protect them. To prevent any change in quality during long-term storage, be sure to use in the order o f first in - fir st out (use the oldest oil or fuel first). FILTERS Filters are extremely important safety parts. They prevent impurities in the fuel and air circuits from entering lems. ils, see the Operation and Maintenance Manual. important equipment and causing prob Replace all filters periodically.

For deta ils, see the Operation and Maintenance Manua However, when working in severe cond itions, replace the filters at shorter intervals ac cording to t he oil and fuel (sulfur content) being used. ype) and use them again. Always replace with new filters. Never try to clean the filters (cartridge t ype) and use them again. Always replace with new filters. When replacing oil filters, check if any m etal particles are attached to the old filter. If any metal parti cles are found, contact your Komatsu distributor. just before they are to be used. Do not open packs of spare filters until Always use Komatsu genuine filters.

ELECTRIC SYSTEM MAINTENAN CE It i s extremely dangerous if the electric al equipment becomes wet or the covering of th e wiring is d amaged. This wil l cause an electrical short circuit and may lead to malfunction of the machine. When washing th e machine , be careful not to let water get into the elec trical components. Service relating to the electric system i s checking fan belt tension, checking damage o r wear to t he fan belt and checking battery fluid level. other than those specified by Komatsu.

Never install any electric components External electro-magnetic interference may cause malfunction of the control system c ontroller, b efore installing a r adio receiver or other wireless equip ment, contact your Komatsu distributor. ly clean the electric system to prevent corrosion. onnect it to the special power source connector. rce to the fuse, starting switch, or battery relay. When working at the seashore, careful ly clean the electric system to prevent corrosio When installing electrical equipment, c onnect it to the special power source connecto Do not connect the optional power sou rce to the fuse, starting switch, or battery relay.