Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BREAKER CIRCUIT ADDITIONAL OIL FILTER ELEMENT WARNING NOTICE 4 - 44 (If e quippe A fter the engine is stopped, the parts and oil are at h igh temperature, s o there is danger of burns. W ait for the temp erature to o down before starting the W hen rem oving the cap fro m oil filler port (F) , turn it slowl y to release t he internal pres sure, then re move it carefull For details o f the replacement i nterval for the element, s ee "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PA GE 4-17)" P repare a container to ca 1. Place a container under the filter element to c atch the oil. 2.

Turn filt er case (1) to the left to remove i t, then take o ut e lement (2). e plug (3) from filter case (1). 3. Remov e plug (3) from fi lter case (1) 4. Clean t he parts that wer e removed and install new e lement (2). 5. When installing filter c lug the tighteni ng torque given Tighten ing torque Case ( 1): 58.8 to 78.5 N m (6 to 8 kgm, 43.4 t o 57. 9 lbf Plug (3 ): 39.2 to 49.0 N m (4 to 5 kgm, 28.9 to 36.2 lbft