Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE LUBRICATING NOTICE 4 - 64 EVERY 500 HOURS MAINTENANC Maintenan ce for every 100 and 250 hours s hould be carried out a I f any ab normal noise is ge nerated from any g reasing point, carr y out g reasing regardless of the g Carry ou t greasing every 10 hours for the first 50 hours o n a new After the machine was subj ected to jobs in th e water, be sure to grease Prepare a grease pump greasing posture shown on the right rk equipment to the ground, then stop , pump in grease through the grease s. any old grease that was pushed out. 1. 2. 3. 1. Set th e machine to the diagra m, lower the wo gine. a grease pump the en 2. Using fittings shown by arrow 3.

After g reasing, wipe off any old grease tha t was p ushed shown on the right the hen stop (1) Boom foot pin (2 places (2) Boom cylinder foot pin ( (3) Boom cylinder rod end (4) Arm cy linder foot pin (2 (5) Arm cy linder rod end pi (6) Boom - Arm coupling pi (7) Bucket cylinder foot pin (8) Arm - Link coupling pin