. ATTACHMENTS AND OPTIONS METHOD FOR INSTALLING EXTRA COUNTERWEIGHT METHOD FOR INSTALLING EXTRA COUNTERWEIGHT Installing Extra Counterweight WARNING 2. Loosen 2 bolts (3), then remove hood stopper bracket (4). 3. Using a crane, install extra counterweight (5) to the back of the standard counterweight. 5. Disconnect the wire rope from the crane. 6 - 18 F or lifting up thi s machine, use a wire rope wit h sufficient strength to withstand the machine wei ght. D o not attempt to lift up the ma chine in a posture other t han explained below. Otherwise there is the danger that the lifted m achine may lo se a balance in t he air. vel. L ift up the mach ine, keeping it le 1.
Open engine hood (1), loos en 4 bolts (2) , then remove engine hood (1). REMARK The optimum len (A) Wire rope: O gth of a wire rope for lifting should be as follows: verall length 800 mm (31.5 in) m (0.355 in) ounterweight: 220 kg (485 lb) Diameter 9 m (B) Eyebolt Weight of extra c ounterweight: 220 kg (485 l b) 4. Fasten the e xtra counterwe ight with mounting bolt s and washers ( (6),(7) (8),(9) Bolt size M24 M12 Q'ty 2 1 Bolt part No . 01010-D2490 01010-81255 Washer part No. 01643-72460 01643-31232 Tightening tor 785 to 980 Nm que (80 to 100 kgm , 578.6 to 723.3 lbft) 785 to 980 Nm (80 to 100 kgm , 578.6 to