Komatsu — TRACK SHOES SELECTION

. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE 6 - 25 TRACK SHOES SELECTION Select the mos t suitable trac k sho e to match the operat ing conditions. Selection Check the category from the uses in the tabl e below, th en select the shoes from the table below that Category of use B is the w ide s hoe, so there are limit s on the u se . Check the precautions for use, examine the conditions o f use thoroughly, a nd use the optimum s hoes for t he situatio When selecting t he shoe width the narrow est shoes possible t the machine range where t here is no proble m regarding machine fl otation an d g round c ontact p ressure.

If wide r shoes th an necessary are used, the l oad o n the trac k shoe will increase, so this ma y cause problems such a s bendin g of the shoe, cr ackin g of the l ink, d amage of t he pin, an d looseness of the s hoe bolt Category Use P recautions when using A Rocky ground, riverbeds, normal soil On rough ground with large obstacles such as boulders or fallen trees, travel at low speed. B Normal soil, soft ground These shoes cannot be used on rough ground where there are large obstacles such as boulders or fallen trees. Travel at high speed only on flat surfaces. If you have to travel over an obstacle, travel slowly in low speed.

C Paved road surfaces To protect the road liner and the rubber shoe, always obey the precautions in Section "ROAD LINERS AND RUBBER SHOES(3-171 PAGE)". Specifications Category Standard 450 mm (17.7 in) Triple A Option 600 mm (23.6 in) Triple B Option 450 mm (17.7 in) Road Liner C Option 450 mm (17.7 in) Rubber shoe C