. OPERATION DETAILED CONTROLS AND GAUGES Meter Display Portion Pilot display Gauge and Meter (1) (2) (3) (4) (5) (6) (7) (8) (9) Engine pre-heating monitor Swing lock monitor Wiper monitor Auto-deceleration monitor Working mode monitor Travel speed monitor Air conditioner monitor Message monitor Idle stop guidance (10) (11) (12) (13) (14) Engine coolant temperature gauge Hydraulic oil temperature gauge Fuel gauge Service meter, clock ECO gauge Pilot Display The pilot display at the top of the screen consists of the pilot lamps to confirm the actuation of each function. When the starting switch is turned ON, the pilot lamp lights up when the display items are functioning.
Engine Pre-heating Monitor This monitor (1) is displayed when preheating the engine before starting the engine in temperatures below 0 ° C (32 ° F). In cold weather, when the starting switch is turned to the HEAT position, the preheating monitor lights up. After lighting up for approx. 30 seconds, it starts to flash to inform the operator that the preheating has been completed. After flashing for approx. 10 seconds, the monitor goes out. 3 - 16