Operation of HSS steering 1. Steering lever at neutral 014012 Traveling in the straight line When the steering lever is at the neutral posi- tion, HSS motor is stopped, and the rotation of the transfer gear and left and right gears A (13) in the planetary system is also stopped. In this condition, the power from bevel gear shaft (16) is input to carrier (25), and is trans- mitted to ring gear (22) through planet shaft (23) and planet pinion (21). It is then transmit- ted to output shaft (1) through brake inner drum (12), and brake hub (5). Therefore, the output speed on the left and right sides in the same, and the machine travles in a straight line.
Direction of rotation of HSS motor * Pivot turn 10-64-6 (21) Steering lever position Left steering Right steeri ng Neutral Directional lever position * Neutr al Forward Reverse * Neutral Forward Reverse Any position Direction of rotation of HSS motor as seen from Clockwis left of machine Counter- e Clockwise clockwise Counter- Counter- clockwise clockwise Does not Clockwise rotate