Komatsu — WORK EQUIPMENT CONTROL

STRUCTURE AND FUNCTION WORK EQUIPMENT CONTROL WORK EQUIPMENT CONTROL D65E-12 60001 – 60947 D65P-12 60001 – 60890 D65EX-12 60001 – 60941 D65PX-12 60001 – 60914 014012 Lever positions 1 HOLD 2 Blade LOWER 3 Blade FLOAT 4 Blade RAISE 5 Blade LEFT TILT/PITCH 6 Blade RIGHT TILT/PITCH 7 HOLD (D65E, EX only) 8 Ripper RAISE (D65E, EX only) 9 Ripper LOWER (D65E, EX only) ? FREE A LOCK B Pitch selector switch OFF (D65P, PX only) C Pitch selector switch ON (D65P, PX only) 1. Safety lever 2. Blade control lever 3. Tilt/pitch selector button (D65P, PX only) 4. Ripper control lever (D65E, EX only) 5. Proximity switch 6. Detent (for holding lever) 7.

PPC lock valve OUTLINE The work equipment control uses a PPC method in which each spool in the control valve is moved by the PPC valve. If safety lever (1) is placed at the LOCK posi- tion, blade control lever (2) cannot be moved to the LOWER position from the HOLD posi- tion. Proximity swithc (5) is installed to pre- vent the engine from starting when the blade control lever is at the FLOAT position. Safety lever (1) is interconnected with PPC lock valve (7) and stops the oil in the PPC circuit when it is at the LOCK position. 10-10 10-86 I