014012 01-18 D I D65E-12 D65P-12 D65EX-12 65001 and up 65001 and up 65001 and up Power train system Bevel gear shaft Spiral bevel gear, force feed lubrication gear pump HSS steering HSS steering system – Differential planetary gear type, hydraulic motor drive type, hand operated, hydraulically actuated Master brake – Wet type, multiple disc, spring boosted, foot operated, hydraulically actuated Clutch and brake Steering clutch Wet type, multiple disc, spring boosted, hand operated, hydraulically actuated _ Steering brake Wet type, multiple disc, spring boosted, foot operated, hydraulically actuated _ Final drive 1-stage spur gear, 1-stage planetary gear, splash type lubrication Undercarriage Suspension Semi-rigid, floating beam Carrier roller (each side) 2 Track roller (each side) 7 8 7 8 510 mm Track shoe 810 mm 950 mm Assembly type, single grouser, 39 o each side, pitch:
203.2 mm – Assembly type, single grouser, 39 on each side, pitch: 203.2 mm – – – Assembly type, single grouser, – 39 on each side, pitch: 203.2 mm – – Assembly type, special swamp shoe, 45 on each side pitch: 203.2 mm – Assembly type, special swamp shoe, 45 on each side pitch: 203.2 mm Power train, lubrication pump Gear type (SAL(2)-050+045) Gear type (SAL(2)-045+045) PPC pump Gear type (SBR(1)-014) Max. discharge pressure: 20.6 MPa {210 kg/cm2} Theoretical discharge amount: 49.4 ¬/min/3,500 rpm HSS motor – Piston type (HMF95DT), swash plate angle 16˚, with brake valve Permissible peak pressure: 47 MPa {480 kg/cm2} Rated flow (theoretical value):
183.2 ¬/min/1,908 rpm Steering, work equipment hydraulic system Hydraulic pump Gear type (SAL(3)-080) Theoretical discharge amount: 201 ¬/min/2,500 rpm Max. discharge pressure: 20.6 MPa {210 kg/cm2} Variable swash plate type (HPV95), CLSS, load sensing type Permissible peak pressure: 47 MPa {480 kg/cm2}