TABLE OF FUEL, COOLANT AND LUBRICANTS D65P-12 60001 – 60890 D65E-12 60001 – 60947 D65PX-12 60001 – 60914 D65EX-12 60001 – 60941 014012 NOTE: (1) When fuel sulphur content is less than 0.5 %, change oil in the oil pan every periodic main- tenance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5 %. (2) When starting the engine in an atmospheric temperature of lower than 0°C, be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40 even though an atmospheric temperature goes up to 10°C more or less in the day time.
(3) Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. (4) There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W- 40), but be sure to add single grade oil that matches the temperature in the table on the left. (5) We recommend Komatsu genuine oil which has been specifically formulated and ap- proved for use in engine and hydraulic work equipment applications. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API: American Petroleum Institute Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity:
Amount of oil needed to refill system during normal inspection and maintenance. 01-25 D 01-27 RESERVOIR KIND OF FLUID AMBIENT TEMPERATURE –22 –4 14 32 50 68 86 104°F –30 –20 –10 0 10 20 30 40°C CAPACITY (¬) Specified Refill Engine oil pan Engine oil 44 38 SAE 30 S AE 10 W SAE 1 0W-30 SAE 15W- 40 Power train case 75 50 SAE 30 Final drive case (each) S AE 10 W E, EX: 24 P, PX: 27 E, EX: 24 P, PX: 27 Damper case D60: 1.5 D65: 1.7 D60: 1.5 D65: 1.7 Idler (each) 4.5 4.5 SAE 30 Pivot shaft case (each) 0.15 0.15 Hydraulic tank 95 55 SAE 10W SAE 1 0W-30 SAE 15W-4 0 Track roller (each) Gear oil 0.32 0.32 GO 140 Carrier roller (each) 0.24 0.24 Fuel tank Diesel fuel 340 — ASTM D975 No. 2 ASTM D 975 No.
1 Cooling system (including sub tank) Coolant Add antifreeze 58.2 — Fuel sulphur content Change interval of oil in engine oil pan 0.5 to 1.0 % 1/2 of regular interval Above 1.0 % 1/4 of regular interval