TESTING AND ADJUSTING H-10 Power train oil temperature rises too high fl Check the oil level in the power train before carrying out troubleshooting. YES YES 4 1 YES Is engine rotation normal at F3 stall? Is brake dragging ? 3 Engine stall speed: Min. 1,650 rpm See Note 1) below. YES Is main relief oil pressure normal ? NO 2 Oil pressure: Min. 3.0 MPa {31 kg/cm 2 } Engine at full throttle Is power train oil temperture sensor normal ? Is free length of spring of main relief valve normal? Does spool move smoothly? 7 YES 014012 NO Remove oil temperature sensor Check resistance value. (See Table 1) NO Free length of spring: 108 mm (small) 128 mm (large) NO NO Note :
1) Stop the machine on level ground, run the en- gine at low idling, then shift to F2 and check if the machine moves. Table 1 20-242 I Ambient temperature When normal 100˚C I 90˚C I 35˚C I 20˚C I 10˚C Approx. 3.8 kΩ I Approx. 5 kΩ I Approx. 29 kΩ I Approx. 52 kΩ I Approx. 80 kΩ