SAFETY AVOID POWER LINES Serious injury or death can result if the machine or front attachments are not kept a safe distance from electric lines. When operating near an electric line, NEVER move any part of the machine or load closer than 3 m plus twice the line insulator length. Check and comply with any local regulations that may apply. Wet ground will expand the area that could cause any person on it to be affected by electric shock. Keep all bystanders or co-workers away from the site. SA-381 PRECAUTIONS FOR LIGHTENING The machine is vulnerable to lighting strikes. In the event of an electrical storm, immediately stop operation, and lower the bucket to the ground.
Evacuate to a safe place far away from the machine. After the electrical storm has passed, check all of the machine safety devices for any failure. If any failed safety devices are found, operate the ma- chine only after repairing them. 029-E01A-0381 SA-1088 OBJECT HANDLING If a lifted load should fall, any person nearby may be struck by the falling load or may be crushed under- neath it, resulting in serious injury or death. When using the machine for craning operations, be sure to comply with all local regulations. Do not use damaged chains or frayed cables, sables, slings, or ropes. Before craning, position the upperstructure with the travel motors at the rear.
Move the load slowly and carefully. Never move it suddenly. Keep all persons well away from the load. Never move a load over a person's head. Do not allow anyone to approach the load until it is safely and securely situated on supporting blocks or on the ground. Never attach a sling or chain to the bucket teeth. They may come off, causing the load to fall. SA-014 032-E01A-0132 SA-21