hitachi — ECM

TROUBLESHOOTING / Troubleshooting A T5-5-21 Presumptive Symptoms in Real Machine Operation Assumptive Conditions at Backup Fault Code (Tech 2) • While the engine runs, there is nothing abnor- mal with machine operation. • After the engine is stalled, the re-start is im- possible. While the engine runs, operate according to standard of the crank sensor. When the en- gine stops, the start is impossible (in order to prevent the engine from damaging). P0340 P0341 • The output power may decrease, white smoke may occur and vibration may occur. • The engine may be stalled. (If the cam senor is normal, the engine can re-start.) Operate according to standard of the cam sen- sor.

P0335 P0336 • While the engine runs, there is nothing abnor- mal with machine operation. • After the engine is stalled, the re-start is im- possible. The timing chain and the belt does not turn smoothly but turn in reverse. P1345 Nothing special When starting: -10 °C (14 °F) (Start the engine although what state.) When operating: 25 °C (77 °F) (Operate nor- mally.) P0113 P0112 Normal temperature: When starting, dark smoke may occur and engine combustion sound may be become loud. While warming up with fresh air in low tempera- ture: Rough idle, engine stall or while smoke may be occur. When starting: -20 °C (-4 °F) (Start the engine although what state.) When operating:

80 °C (176 °F) (Operate normally.) P0118 P0117 Dark smoke occurs. Boost pressure cannot be corrected. P0238 P0237 There is influence to exhaust gas. As the sensor input is not certain, it cannot be controlled. Exhaust gas becomes bad. Operate the engine with EGR valve fully open. P0487 Dark smoke occurs at high altitude. Atmospheric pressure 80 kPa (0.8 kgf/cm2, 12 psi) (2000 m above the sea) P0108 P0107 Nothing special When starting: -20 °C (-4 °F) (Start the engine although what state.) When operating: 70 °C (158 °F) (Operate nor- mally.) P0183 P0182