TROUBLESHOOTING/ Troubleshooting A Presumptive Symptoms in Real Machine Operation Assumptive Conditions at Backup Fault Code (Tech 2) There is influence to exhaust gas. EGR cannot be controlled. As exhaust gas becomes bad, EGR stops. P0488 The engine may be stalled and the rotation speed increases automatically and abnormally according to open or shorted circuitc ondition. Dark smoke occurs. Output power is too large. The supply pump cannot be controlled. Prevent the engine from increasing the rotation speed automatically and abnormally (Protect the engine).
P0090 Vibration of the engine is large, Rough idle, output power decrease, faulty increasing of rotation speed, output power decrease #1 injector cannot be controlled. Stop drive pulse output of #1 injector. P0201 #2 injector cannot be controlled. Stop drive pulse output of #2 injector. P0202 #3 injector cannot be controlled. Stop drive pulse output of #3 injector. P0203 #4 injector cannot be controlled. Stop drive pulse output of #4 injector. P0204 T5-5-27