hitachi — CAN Harness Check

TROUBLESHOOTING / Troubleshooting A Discontinuity Check between CAN Circuit and Ground Circuit IMPORTANT: Before continuity check, turn the key switch OFF. In case of continuity, the circuit between CAN circuit and ground circuit is shorted. In case of discontinuity, the circuit is normal. MC Between CAN Circuit (High Side) and Ground Circuit Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #A2 of harness end of connetor in MC-A. Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #A13 of harness end of connetor in MC-A.

Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #B8 of harness end of connetor in MC-B. Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #B18 of harness end of connetor in MC-B. Connector Connector MC-C (Harness end) C1 #C4 C10 C23 C31 Connector MC-A (Harness end) #A2 T183-05-04-008 #A13 Connector MC-B (Harness end) #B8 #B18 T183-05-04-021 T5-5-61