hitachi — CAN Harness Check

TROUBLESHOOTING / Troubleshooting A Discontinuity Check between CAN Circuit and Power Circuit IMPORTANT: Before continuity check, turn the key switch OFF. In case of continuity, the circuit between CAN circuit and power circuit is shorted. In case of discontinuity, the circuit is normal. Connector Connector MC-C (Harness end) C1 #C4 C10 MC Between CAN Circuit (High Side) and Power Circuit Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #A1 of harness end connector MC-A. Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #A12 of harness end connector MC-A.

Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #B7 of harness end connector MC-B. Check for continuity between terminal #C4 of harness end of connector MC-C and terminal #B17 of harness end connector MC-B. C23 C31 Connector MC-A (Harness end) #A1 #A12 T183-05-04-008 Connector MC-B (Harness end) #B7 #B17 T183-05-04-021 T5-5-65