hitachi — ICF, Satellite Terminal Fault Codes 14006, 14008, 14100 to 14106

TROUBLESHOOTING / Troubleshooting A ICF, SATELLITE TERMINAL FAULT CODES 14006, 14008, 14100 to 14106 Fault Code 14006-2 Check the communication line 1. Check for continuity between terminal #A8 of harness end of connector ICF-A in ICF and ter- minal #10 of harness end of connector A in satel- lite terminal. 2. Check for continuity between terminal #A9 of harness end of connector ICF-A in ICF and ter- minal #20 of harness end of connector A in satel- lite terminal. 3. Check for continuity between terminal #A31 of harness end of connector ICF-A in ICF and ter- minal #2 of harness end of connector B in satellite terminal. Check the power source line of satellite terminal 1.

Check the battery power Check voltage between terminal #2 of harness end of connector A in satellite terminal and ma- chine is 24 V. 2. Check the main power With the key switch ON, check voltage between terminal #1 of harness end of connector A in sat- ellite terminal and machine is 24 V. 3. Check the ground power Check for continuity between terminals #11 and #12 of harness end of connector A in satellite terminal. Connector (Harness end of connector viewed from the open end) ICF Connector ICF-A #A8 #A9 #A31 Satellite Connector A Satellite Connector B T5-5-115 Fault Code Trouble Remedy 14006-2 ICF: Satellite Communication Termi- nal: Communication Error Execute retry B in self-diagnosing.

If this error code is displayed after re-try, check the following item. Check the communication line. Check the power source line of satellite terminal. Check the fuse. Then, execute self-diagnosing and execute retry B. 14008-2 ICF: Abnormal Internal RAM Execute retry B in self-diagnosing. If this error code is displayed after re-try, replace the con- troller. 14100-2 Satellite Communication Terminal: Abnormal EEPROM 14101-2 Satellite Communication Terminal: Abnormal IB/OB Queue 14102-2 Satellite Communication Terminal: Abnormal Local Loup Back Check the communication aerial of satellite terminal. (Refer to T5-5-116.) 14103-2 Satellite Communication Terminal: The satellite is not found.

14104-2 Satellite Communication Terminal: Fail 1 of Remote Loup Back Execute retry B in self-diagnosing. If this error code is displayed after re-try, replace the con- troller. 14105-2 Satellite Communication Terminal: Fail 2 of Remote Loup Back 14106-2 Satellite Communication Terminal: Sending and receiving data are mis- matched. 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9