TROUBLESHOOTING / Troubleshooting A MONITOR UNIT FAULT CODE 13304 Check the wiring connections first. NOTE: As terminal L in the regulator is a water- proof type connector, it is difficult to meas- ure voltage. Measure voltage at terminal R in starter relay 2. Check for continuity at terminal R in starter relay 2 and terminal L in regulator. Connector (Harness end of connector viewed from the open end) Faulty monitor unit. Less than 33.5 V Less than 33.5 V Measure voltage at terminal #C7 of con- nector monitor-C. · Engine: Running Open circuit in harness between terminal L in regulator and monitor unit. Measure voltage at terminal L in regula- tor.
33.5 V or higher Faulty regulator or faulty alternator. 33.5 V or higher Starter Relay 2 Monitor Unit Connector Monitor-C #C7 T5-5-118 Fault Code Trouble Remedy 13304-2 Abnormal REG Input H Level Refer to the following. E S R 6 1 12 7