TROUBLESHOOTING / Troubleshooting B TROUBLESHOOTING B PROCEDURE Apply troubleshooting B procedure when no fault code is displayed on the service menu in monitor unit and the diagnosing by Dr. ZX although the machine operation is abnormal. On the front section pages of this group are the tables indicating the relationship between machine trouble symptoms and related parts which may cause such trouble if failed. Start the troubleshooting with more probable causes selected by referring to these tables. How to Read the Troubleshoting Flow Charts After checking or measuring item (1), select either YES (OK) or NO (NOT OK) and proceed to item (2) or (3), as appropriate.
Special instructions or reference item are indicated in the spaces under the box. Incorrect measuring or checking methods will render troubleshooting impossible, and may damage components as well. · Key switch: ON Explanation of how to use test harness kit required. Refer to “Electrical System Inspection” Group (Group 7) in this section. Use the service menu (diagnosing system/monitoring ) in monitor unit or the diagnosing system / monitor function in Dr. ZX. Causes are stated in a thick-line box. Scanning through thick-line boxes, possible causes can be seen without going through the flow chart. T5-6-1 YES(OK) (2) (1) (3) NO(NOT OK) YES(OK) (2) (3) NO(NOT OK) (1)