TROUBLESHOOTING / Troubleshooting B Item Parts Symptoms in machine operation when trouble occurs. Pressure Sensor (Boom Raise) When operating boom raise during HP mode control, en- gine speed does not increase. During combined operation of boom raise and arm roll-in, arm speed is slow. During boom raise operation, lifting power is weak. T5-6-10 Function Symptoms in control system when trouble occurs. • Monitors boom raise pilot pressure in order to control HP mode, arm regeneration and auto-power lift controls. • HP mode control Engine speed does not in- crease when operating boom raise.
• Arm regeneration control Arm regeneration is ineffective during combined operation of boom raise and arm roll-in. • Digging regeneration control Digging regeneration control is ineffective. • Travel motor displacement angle control The machine travels at slow speed. • Auto-power lift control The operating boom rasie, pressure does not increase. • Attachment flow rate control During combined operation of attachment and boom raise, attachment operation speed is fast. • Boom limit is operated.