hitachi — Relationship between Machine Trouble Symptoms and Related Parts

TROUBLESHOOTING / Troubleshooting B T5-6-20 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Secondary Pilot Relief Pressure Control Sole- noid Valve (Optional) • Activates when attachment “secondary pilot relief pressure ON” is selected and shifts secondary pilot relief pressure control valve spool. • If secondary pilot relief pressure control solenoid valve is not activated, pressure at output port becomes 0 MPa (0 kgf/cm2) when attachment “secondary pilot relief pressure ON” is selected. • Relief set-pressure in auxiliary circuit does not decrease.

Oil Temperature Sensor • Monitors hydraulic oil temperature in order to control auto-warming control. • Auto-warming control Auto-warming control is ineffective. • When oil temperature is lower than 0 °C, auto-warming up control is not operated. Power Digging Switch • Activates power digging control. ON: 0 V→Increasing pressure OFF: 5 V→ Not increasing pressure • Open circuit: Pressure does not increase. • Shorted circuit: Pressure does not increase for 8 seconds after the key switch is turned ON. • Power digging control is not operated if open circuit or shorted circuit occurs. Travel Mode Switch • Shifts travel mode. Fast mode: 0 V Slow mode: 5 V • Open circuit in switch:

Travel speed remains unchanged in slow mode (5 V). • Shorted circuit in switch: Travel speed remains unchanged in auto-second gear (0 V). • Even if travel mode switch is turned to the FAST position, fast travel mode cannot be selected. • Even if travel mode switch is turned to the SLOW position, travel mode is turned to the auto-second gear. MC • Controls engine, pump and valve operations. • Depending on trouble situations, control system malfunction may differ. (The following symptoms in machine operation indicates that MC logic circuit has failed.) • Even if engine starts, engine speed remains in idle speed. • As pump displacement is kept at minimum, all operation speeds are slow.