TROUBLESHOOTING / Troubleshooting B T5-6-24 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Arm 2 Flow Rate Control Valve • Be shifted by pilot pressure from solenoid valve unit (SC). • Ensures boom raise speed during combined operation of boom and arm. • If spool is bound or spring is broken, orifice does not change • If fully opened: Boom raise speed is slow. • If fully closed: Arm roll-in speed is slow during arm level crowd operation. Flow Combiner Valve • Supplies oil to both right and left travel spools from pump 1 during combined operation of travel and front/swing.
• During combined operation of travel and front/swing, oil is not supplied to left travel spool, or insufficient oil is supplied to left travel spool. • While traveling and when front/swing lever is operated, machine mistracks to the left. Arm 1 Flow Rate Control Valve • Be shifted by pilot pressure from arm flow rate control valve in signal control valve. • Ensures swing power. • If spool is bound or spring is broken, orifice does not change. • If fully opened: swing power is lack. • If fully closed: Arm roll-in speed is slow during arm level crowd operation.
Bucket Flow Rate Control Valve • Restricts oil flow to bucket during 3-combined operation of bucket, arm roll-in and boom raise, and allows boom to raise. • If selector valve is bound with selector valve activated, bucket circuit is always restricted. • If poppet valve is bound at fully closed position or if selector valve is bound when poppet valve is fully closed, bucket speed becomes slow. • If poppet valve is bound at fully open position or if selector valve is bound when poppet valve is fully open, boom does not raise during 3-combined operation of bucket, arm roll-in and boom raise.