TROUBLESHOOTING / Troubleshooting B Item Parts Symptoms in machine operation when trouble occurs. Pump 1 Flow Rate Con- trol Valve If spool is bound at fully open, even if control lever is in neutral, pump 1 swash angle is tilted to maximum. (When traveling with travel levers held in half stroke, machine mistracks to the left.) If spool is bound at fully open, pump 1 control pressure sensor detects the maximum pressure. If spool is bound at fully closed, even if control lever is operated, pump 1 swash angle is tilted to minimum. (Right travel is not operated during single travel operation.
Bucket speed becomes very slow.) If spool is bound at fully open, pump 1 control pressure sensor cannot detect pump control pressure. (Right travel does not run fast with right track jacked-up.) T5-6-32 Function Symptoms in control system when trouble occurs. • Supplies flow rate control pressure Pi to pump 1 regulator in response to lever stroke when boom (raise/lower), arm (roll-out/in), bucket (roll-out/in), right travel or auxiliary is operated. • If spool is bound at fully open, even if control lever is in neutral, pump 1 swash angle is tilted to maximum.
(When traveling with travel levers held in half stroke, machine mistracks to the left.) • If spool is bound at fully open, pump 1 control pressure sensor detects the maximum pressure. • If spool is bound at fully closed, even if control lever is operated, pump 1 swash angle is tilted to minimum. (Right travel is not operated during single travel operation. Bucket speed becomes very slow.) • If spool is bound at fully open, pump 1 control pressure sensor cannot detect pump control pressure. (Right travel does not run fast with right track jacked-up.)