hitachi — Relationship between Machine Trouble Symptoms and Related Parts

TROUBLESHOOTING / Troubleshooting B T5-6-34 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Pump 2 Flow Rate Con- trol Valve • Supplies flow rate control pressure Pi to pump 2 regulator in response to lever stroke when boom (raise/lower), arm (roll-out/in), swing (right/left), left travel or auxiliary is operated. • If spool is bound at fully open, even if control lever is in neutral, pump 2 swash angle is tilted to maximum. (When traveling with travel levers held in half stroke, machine mistracks to the right.) • If spool is bound at fully open, pump 2 control pressure sensor detects the maximum pressure.

• If spool is bound at fully closed, even if control lever is operated, pump 2 swash angle is tilted to minimum. (Left travel is inoperable during single travel operation. Swing speed becomes very slow.) • If spool is bound at fully open, pump 2 control pressure sensor cannot detect pump control pressure. (Left travel does not run fast with left track jacked-up.) • If spool is bound at fully open, even if control lever is in neutral, pump 2 swash angle is tilted to maximum. (When traveling with travel levers held in half stroke, machine mistracks to the right.) • If spool is bound at fully open, pump 2 control pressure sensor detects the maximum pressure.

• If spool is bound at fully closed, even if control lever is operated, pump 2 swash angle is tilted to minimum. (Left travel is inoperable during single travel operation. Swing speed becomes very slow.) • If spool is bound at fully open, pump 2 control pressure sensor cannot detect pump control pressure. (Left travel does not run fast with left track jacked-up.) Flow Combiner Valve Control Spool • Be shifted by right travel pilot pressure and supplies control pressure to flow combiner valve in control valve. • If spool is bound at fully open, when boom, arm, bucket or swing is operated, flow combiner valve is shifted.

• If spool is bound at fully closed, when combined operation of travel and front/swing is made, machine mistracks to the left. (Left travel speed becomes slow.) • If spool is bound at fully open, when boom, arm, bucket or swing is operated, flow combiner valve is shifted. • If spool is bound at fully closed, when combined operation of travel and front/swing is made, machine mistracks to the left. (Left travel speed becomes slow.)