hitachi — Engine System Troubleshooting

TROUBLESHOOTING / Troubleshooting B Even if power mode switch is not turned to E mode, engine speed decreases. Required engine speed from the engine control dial must be beyond 1800 min -1 when the pump control pressures of pump 1 and 2 are low or the average delivery pressures of pump 1 and 2 are high, if E mode control is performed. The sensors related to this condition may not be faulty at the same time. NO Shorted circuit in harness between MC and power mode switch, or faulty power mode switch. Monitor power mode switch. Check if “E” is displayed. YES Refer to fault code 11004 in Troubleshooting A · Monitor item: E/P/HP mode switch · Power mode switch:

P mode Check if fault code 11004-2 is displayed. YES Faulty MC. NO T5-6-77