TROUBLESHOOTING / Troubleshooting B YES Faulty monitor unit, or shorted circuit in harness between monitor unit and security relay. Connect connector monitor-B. Check for continuity between terminal #2 of harness end of connector in pilot shut-off relay and machine. YES Faulty pilot shut-off sole- noid valve. YES A · Pilot shut-off lever: ON Open circuit in harness between terminals #B12 and #B19 of harness end of connector monitor-B, or faulty pilot shut-off lever. NO NO Open circuit in harness between pilot shut-off re- lay and monitor unit.
NO Connector (Harness end of connector viewed from the open side) Pilot Shut-Off Relay Connector Monitor-B #B2 T183-05-04-003 T5-6-90 Faulty monitor unit. NO Check for continuity between terminals YES #B19 and #B12 of harness end of con- nector monitor-B. Connect terminal #2 of harness end of con- nector in pilot shut-off relay to machine. Disconnect connector monitor-B in monitor NO unit. Check for continuity between terminal #2 of harness end of connector and ma- chine. 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 #B19 #B12 6 5 20 19 18 17 16 15 14 13 12 11 #B19 #B12