hitachi — All Actuator System Troubleshooting

TROUBLESHOOTING / Troubleshooting B A-3 Left travel is not operated during single travel operation. Single swing operation speed becomes slow. Arm speed is slightly slow during arm level crowding. (All prob- lems occur at the same time.) Related MC Fault Code: None The pump 2 flow rate is minimized (approx. 20 L/min) due to some reasons. Accordingly, the left travel and swing motors, which are driven by pressure oil from pump 2, moves very slow. Pressure oil from pump 1 is also routed to the arm and boom cylinders so that the arm and boom can move at a slightly slow speed in single operation.

However, in level crowd operation, pressure oil is routed to the boom prior to the arm so that arm speed becomes very slow. Refer to the SYSTEM / Hydraulic System group in the T/M (Operational Principle). YES Faulty pump 2 regulator. Monitor pump 2 pump control pressure. Check if pressure in- creases in proportion to left travel lever stroke. Bound pump 2 flow rate control valve in signal con- trol valve. · Monitor item: Pump 2 pump control pressure · Possible to display by service menu and moni- toring in monitor unit. NO T5-6-92