TROUBLESHOOTING / Troubleshooting B F-10 Front attachment drifts remarkably. Related MC Fault Code: None Boom Cylinder Internal Leakage Check 1. With the bucket cylinder fully retracted and the arm cylinder slightly extended from the fully re- tracted position, lower the bucket tooth tips onto the ground. 2. Remove the hoses from the boom cylinder rod side. Drain oil from the hoses and cylinders. (Plug the disconnected hose ends.) 3. Retract the arm cylinder and lift the bucket off the ground. If oil flows out of the hose removed pipe ends and the boom cylinders are retracted at this time, oil leaks in the boom cylinders.
In case no oil flows out of the hose removed pipe ends but the boom cylinders are retracted, oil leaks in the con- trol valve. T105-07-04-009 T5-6-110 YES Normal Correctly adjust emer- NO Check if each front gency valve and lock it attachment cylin- Check if emergency up. der drift is within valve at boom 1 sec- specification. NO tion in control valve Check if symptom is 4-spool side is cor- deleted when overload rectly adjusted. relief valve is tempo- Check if cylinder drift YES rarily switched with is reduced when pilot another overload relief NO shut-off valve is valve. closed. Faulty pilot valve. YES YES Normal Faulty pilot valve. YES