TROUBLESHOOTING / Troubleshooting B T-2 One side track does not rotate or rotates slowly. Machine mistracks. Related MC Fault Code: None Check that both side track sags are equally ad- justed. Faulty pump control will cause the machine to mistrack. In this case, other trouble symptoms such as slow bucket or swing single operation speed, or slow arm roll-in and boom raise speed in level crowd operation will occur at the same time. If both mistrack and other symptoms as de- scribed above occurs at the same time, refer to A-3 and A-4. In one side track only does not rotate, the pilot valve, control valve, travel motor, or center joint may be faulty.
YES Check if travel motor drain oil amount is normal. · Measurement: Refer to Operational Per- formance Test Sec- tion. · Relieve travel circuit. · Monitor item: Pump 1 and 2 delivery pressures · Possible to display by service menu and monitoring in monitor unit · Measurement: Refer to Operational Performance Test Sec- tion. Switch forward travel relief valve with reverse travel one, or right travel relief valve with left one. Check if symptom is reversed. NO Check if secondary travel pilot pressure is normal. Bound control valve spool. · Monitor item: Travel con- trol pressure YES NO Faulty pilot valve.
Seal Location Left Travel (Reverse) Right Travel (Reverse) Left Travel (Forward) Right Travel (Forward) T105-07-04-015 T5-6-126 NO Check if travel relief pressure in slow speed side is normal. Check if symptom is re- versed when right and YES left travel line hoses are switched each other at the top of center joint. Relationship between Faulty Seal Location and Mistrack Direction Seal When traveling When pivot turn No. straight: is performed: 1 External Oil Leak ← 2 3 4 5 6 7 External Oil Leak ← 1 el ) el ) 2 3 4 5 6 7