hitachi — Travel System Troubleshooting

TROUBLESHOOTING / Troubleshooting B T-4 Occasionally, machine may mistrack when traveling with engine running at slow speed. Related MC Fault Codes: 11200-3, 11200-4, 11202-3, 11202-4, 11304-3, 11304-4, 11307-3, 11307-4, 11401-2, 11401-3, 11401-4 Refer to the pages for the SYSTEM / Control System group / Travel Torque-Up Control in the T/M (Operational Principle). Check the wiring connections first. Faulty corresponding sensor, or open circuit in harness between MC and corresponding sensor. Faulty torque control so- lenoid valve and faulty MC. Open circuit in harness between torque control solenoid valve and MC. YES Check is fault code is displayed. · Fault codes: 11200-3, 11200-4:

Pump 1 delivery pres- sure sensor 11202-3, 11202-4: Pump 2 delivery pres- sure sensor 11304-3, 11304-4: Pressure sensor (travel) 11307-3, 11307-4: Pressure sensor (front attachment. 11401-2, 111401-3, 11401-4 : Torque con- trol solenoid valve · Possible to display by service menu and monitoring by monitor unit. Faulty pump device. Monitor output pressure from torque control sole- noid valve. Install a pres- sure gauge to torque control solenoid valve output port. Check if both pressures measured by pressure gauge and Dr. ZX varies identically by approx. 1.5 MPa (15 kgf/cm 2 ) when travel operation is made. YES NO NO Faulty pressure sensor (travel). · Monitor item:

Pump torque proportional solenoid valve output · Engine: Running at slow idle speed T5-6-129