hitachi — Other System Troubleshooting

TROUBLESHOOTING / Troubleshooting B OTHER SYSTEM TROUBLESHOOTING O-1 Wiper is not operated. Related MC Fault Code: None Checking Instructions The wiper is driven by electric power routed via the relay circuit. The relay circuit is controlled by the monitor unit. In case the wiper is not operated, first check if the wiper relay is activated. Next, check if electric power is routed to the wiper mo- tor. ated. Faulty monitor unit. Faulty wiper relay. Disconnect connector monitor-A in monitor unit. Connect terminal #A2 of harness end of con- nector to machine. Disconnect wiper relay. Check for continuity between terminal #A2 of harness end of con- nector and machine. YES · Key switch:

ON NO Open circuit in harness between wiper relay and monitor unit. NO Check if wiper relay is turned ON/OFF according to INT. position of wiper switch. YES · Key switch: ON · Wiper switch: INT Close front window. Disconnect connector in wiper motor. Check if voltage be- tween terminals B and L of harness end of connector is 24 V. Faulty wiper motor. YES Open front window. Check if voltage be- tween terminals B and L at window contact in cab end is 24 V. Open circuit in harness between window con- tact and wiper motor. YES NO · Key switch: ON · Wiper switch: ON · Key switch: ON · Wiper switch: ON NO Open circuit in harness between wiper relay and window contact.

Window Contact (Cab end) Connector Wiper Motor (harness end) T1V1-05-07-005 Monitor Unit Connector Monitor-A (harness end) #A2 T183-05-05-001 T5-6-132 Switch wiper relay with other general relay. NO YES INT. Position Setting Time Slow Speed 8 seconds Middle Speed 6 seconds Fast Speed 3 seconds B L S E