E When fitting the plug, always clean the gasket surface and use a new gasket. Wipe off any dirt from the threads and screw in the spark plug to the correct torque. Spark plug torque: Refer to “SPECIFICATIONS”, page 4-1. NOTE: If a torque-wrench is not available when you are fitting a spark plug, a good esti- mate of the correct torque is 1/4 to 1/2 a turn past finger-tight. Have the spark plug adjusted to the correct torque as soon as possible with a torque-wrench. q w 903022 1 Spark plug gap 2 Spark plug I.D. mark (NGK) 4-10 Initial of spark plug I.D. mark Plug wrench size B 21 mm (13/16 in.) C/BK 16 mm (5/8 in.) D 18.3 mm (23/32 in.)